Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Parameter
Extended flash
Attended transfer
Alert transfer
Enable hotline
Number
Move the switch to the right to use combination of the FLASH key
and number keys of the phone in order to organize three-party calls
or transfer calls.
Use of FLASH key
The function is enabled. The phone connected to this line has
•
an incoming call in the standby mode and an outgoing call in
the talk mode. It's needed to press the FLASH key, hear the
dial tone, and then press:
◦ the number key 0 in order to end the first call and
continue the second call,
◦ the number key 1 in order to end the second call and
continue the first call,
◦ the number key 2 in order to put the second call on hold
and continue the first call,
◦ the number key 3 to have a three-party call with the first
and second speakers.
The function is not enabled. The phone connected to this line
•
has an incoming call in the standby mode and an outgoing
call in the talk mode. It's needed:
◦ to press the FLASH key in order to put the second call
on hold and continue the first call,
◦ to hang up the receiver in order to end both calls and
connect the first and second speakers to each other.
Move the switch to the right if you want to transfer calls when a
called party's receiver is lifted.
Move the switch to the right if you want to transfer calls when a dial
tone is heard.
Hotline
Move the switch to the right to make the phone connected to this
line dial the number specified in the Number field after the receiver
is lifted.
A number dialed by the phone connected to this line after the
receiver is lifted. Also you can specify a number in the format
phone_number@IP_address for direct IP calls bypassing the
SIP proxy server. The field is available for editing if the Enable
hotline switch is moved to the right.
Page 211 of 266
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
