Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Figure 99. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of dynamic IP
address assignment
Start IP
End IP
Lease time
DNS relay
Dynamic IP Addresses
An operating mode of the router's DHCP server.
Disable: the router's DHCP server is disabled, clients' IP addresses
are assigned manually.
DHCP server: the router assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the Start IP, End IP, Lease time fields and
the DNS relay switch are displayed on the tab.
DHCP relay: an external DHCP server is used to assign IP
addresses to clients. When this value is selected, the External
DHCP server IP and Option 82 Remote ID fields are displayed
on the tab.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
Page 124 of 266
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
