Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
PIN
On the LTE Modem / PIN page, you can change the PIN code of the SIM card inserted into the
built-in modem, disable or enable the check of the PIN code.
The current state of the SIM card inserted into the built-in modem is displayed in the Status field.
If the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is
enabled, the Device is locked value is displayed in the Status field. If the PIN code is entered
correctly or the PIN check is disabled, the Device is unlocked value is displayed in the Status
field.
If the PIN code check for the SIM card inserted into the built-in modem is not disabled, the Yes
value is displayed in the PIN code request field. If the PIN check is disabled, the No value is
displayed in the PIN code request field.
To disable the PIN code check, in the PIN Code Request section, enter the current PIN code in
the PIN code field and click the DISABLE button (the button is displayed if the PIN code check is
enabled).
To enable the PIN code check, in the PIN Code Request section, enter the PIN code used before
disabling the check in the PIN code field and click the ENABLE button (the button is displayed if
the PIN code check is disabled).
To change the PIN code, in the Changing PIN Code section, enter the current code in the PIN
code field, then enter a new code in the New PIN code and New PIN code confirmation
fields and click the SAVE button.
If upon one of the operations described above you have entered an incorrect value in the PIN code
field three times (the number of remaining attempts is displayed on the page), the SIM card inserted
into the built-in modem is blocked.
Figure 134. The LTE Modem / PIN page.
Page 171 of 266
Configuring via Web-based Interface
Advertisement
Table of Contents
