DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Alarm Clock
On the VoIP / Alarm Clock page, you can configure the phones connected to the FXS ports of the
router as alarm clocks.
In the Line 1 and/or Line 2 section, move the Enable switch to the right. Then specify the time at
which the phone should ring in the Hour and Minutes fields. In the Ring time field, specify the
signal duration. Then click the APPLY button.
When the router is powered off or rebooted, the system time is reset to the default value.
!
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter net. If you have set the system time
manually, you need to set the time and date again.
Figure 173. The VoIP / Alarm Clock page.
Page 228 of 266
Configuring via Web-based Interface