D-Link DWR-980 User Manual page 61

DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Parameter
VLAN ID
Allowed
Click the SAVE button.
Then in the LAN section, from the Bridged with drop-down list of the element corresponding to
the LAN port or wireless interface to which the additional device is connected, select the created
connection. Click the APPLY button.
!
The selected port or wireless interface cannot use the default connection to access the
Internet.
for applications that allow various delays and losses of packets. The
Peak Cell Rate is a determining factor in how often cells are sent in
an effort to minimize lag or jitter caused by traffic inconsistencies.
When you select this value from the drop-down list, the Peak cell
rate field is displayed. Specify a required value (in cells per second).
CBR
(Constant Bit Rate): This service is used for applications that require
a constant data rate. It is mostly used for transferring uncompressed
audio and video, e.g. videoconferencing, interactive audio
(telephony), audio/video distribution (television, distance education,
e-shops), and retrieval (video-on demand, audio libraries). When you
select this value from the drop-down list, the Peak cell rate field is
displayed. Specify a required value (in cells per second).
Non Realtime VBR
(Non-Real-time Variable Bit Rate): This service can be used for
transferring data that have critical response-time requirements, e.g.
air ticket booking, bank transactions, and process monitoring. When
you select this value from the drop-down list, the Peak cell rate,
Sustainable cell rate, and Maximum burst size fields are
displayed. Specify required values.
Realtime VBR
(Real-time Variable Bit Rate): This service is used for delay-sensitive
applications such as real time video. The Rt-VBR provides higher
network flexibility than the CBR service. When you select this value
from the drop-down list, the Peak cell rate, Sustainable cell
rate, and Maximum burst size fields are displayed. Specify
required values.
If the service used by your additional equipment is provided via a
VLAN channel with a tag (VLAN ID), specify the needed value.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page 61 of 266
Configuring via Web-based Interface
Description