Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
The ATM section is displayed for ADSL WAN connections.
Figure 66. The page for creating a new Static IPv6 connection. The ATM section.
Parameter
VPI
VCI
Encapsulation Mode
QoS
ATM
Virtual Path Identifier.
Virtual Circuit Identifier.
Select LLC or VCMUX from the drop-down list.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications
that allow various delays and losses of packets. It is appropriate to
use the UBR service for text/data/image transfer applications, as
well as messaging, distribution, retrieval, and remote terminal
applications.
UBR with PCR
(Unspecified Bit Rate with Peak Cell Rate): The UBR service is
used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are
sent in an effort to minimize lag or jitter caused by traffic
inconsistencies. When you select this value from the drop-down list,
the Peak Cell Rate field is displayed. Specify a required value (in
cells per second).
CBR
(Constant Bit Rate): This service is used for applications that
require a constant data rate. It is mostly used for transferring
uncompressed audio and video, e.g. videoconferencing, interactive
audio (telephony), audio/video distribution (television, distance
education, e-shops), and retrieval (video-on demand, audio
Page 84 of 266
Configuring via Web-based Interface
Description
The valid range is from 0 to 255.
The valid range is from 32 to 65535.
Advertisement
Table of Contents
