Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Selecting Operation Mode
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Ethernet (WAN) value. In this mode you can configure a WAN
connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
configure LAN ports to connect an STB or VoIP phone, and set your own password for access to the
web-based interface of the device.
Figure 24. Selecting an operation mode. The Ethernet (WAN) mode.
In order to connect your device to a VDSL or ADSL line, on the Device mode page, from the
Connection method list, select the VDSL or ADSL value correspondingly. In this mode you can
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, configure LAN ports to connect an STB or VoIP phone, and set your own password
for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The VDSL mode.
Page 39 of 266
Configuring via Web-based Interface
Advertisement
Table of Contents
