Creating Wired Wan Connection - D-Link DWR-980 User Manual

DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual

Creating Wired WAN Connection

This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN),
and Wi-Fi modes.
You should configure your WAN connection in accordance with data provided by your
!
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, from the Connection type list, select the
connection type used by your ISP and fill in the fields displayed on the page.
2. Specify the settings necessary for the connection of the selected type.
3. For the VDSL, Ethernet (WAN), Ethernet (LAN) modes: If your ISP uses MAC address
binding, select the Clone MAC address of your device checkbox.
4. For the VDSL, Ethernet (WAN), Ethernet (LAN) modes: If the Internet access is
provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID
field.
5. For the ADSL mode: Specify the VPI and VCI values in the relevant fields.
6. Click the NEXT button to continue or click the BACK button to return to the previous page.
Page 46 of 266
Configuring via Web-based Interface