Download Print this page

D-Link DWR-922 User Manual

4g lte router
Hide thumbs

Advertisement

Version 1.00 | 08/15/2014

User Manual

4G LTE Router
DWR-922

Advertisement

loading

  Related Manuals for D-Link DWR-922

  Summary of Contents for D-Link DWR-922

  • Page 1: User Manual

    Version 1.00 | 08/15/2014 User Manual 4G LTE Router DWR-922...
  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.00 August 15, 2014 • Initial release...
  • Page 3: Table Of Contents

    Wireless Setup ..............16 Routing ...................41 Wireless Security ............17 Samba ..................42 Add Wireless Device with WPS ........18 UPnP ..................43 WLAN MAC Filter ..............19 TR069 ..................44 WLAN Performance ............20 System ....................46 LAN ....................21 Time Settings ...............46 LAN Setup ................21 D-Link DWR-922 User Manual...
  • Page 4 Windows® 8 ...................57 WPA/WPA2 ................57 Windows® 7 ...................59 WPA/WPA2 ................59 WPS ..................62 Windows Vista® ................66 WPA/WPA2 ................67 Windows® XP ................69 WPA/WPA2 ................70 Troubleshooting ..............72 Wireless Basics ..............76 What is Wireless? .................77 Tips ....................79 Wireless Modes ................80 D-Link DWR-922 User Manual...
  • Page 5: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DWR-922 4G LTE Router Power Adapter 3G/4G Antennas RJ-45 and RJ-11 Cables If any of the above items are missing, please contact your reseller. System Requirements • A compatible (U)SIM card with service.* •...
  • Page 6: Introduction

    Introduction The D-Link 4G LTE Router allows users to access worldwide mobile broadband networks. Once connected, users can transfer data, stream media, and send SMS messages. Simply insert your 3G / 4G SIM card, and share your 3G / 4G Internet connec- tion through a secure 802.11n wireless network or using any of the four 10/100/1000 Ethernet ports.
  • Page 7: Hardware Overview

    Will be solid green if the SMS inbox is full, or blinking if there is an unread new SMS message. WLAN LED Will be lit if the wireless function is enabled, and will blink when wireless data is being transferred. D-Link DWR-922 User Manual...
  • Page 8: Back View

    SIM Card Slot Accepts a standard (U)SIM card for 3G/4G LTE connectivity. Power Connector Connects to the included power adapter. Power Button Turns the device on or off. Phone Port For connection to a phone handset. D-Link DWR-922 User Manual...
  • Page 9: Installation

    Note: The DWR-922 4G LTE Router LAN Ports are Auto-MDI/MDIX, so both patch and crossover Ethernet cables can be used. 5. If you have a telephone handset and wish to use the DWR-922 to make VoIP calls, connect one end of the RJ-11 cable to your handset and the other end to the phone port on the back panel of the DWR-922.
  • Page 10: Wireless Installation Considerations

    Wireless Installation Considerations The DWR-922 can be accessed using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range of the wireless signal.
  • Page 11: Configuration

    At the top of the page is a menu. Clicking on one of these icons will take you to the appropriate configuration section. On each page, fill out the desired settings and click Apply when you are done or Reset to revert to the old settings. D-Link DWR-922 User Manual...
  • Page 12: Internet

    Keep Alive: Select Disable or Use Ping depending on the settings required by your ISP. If you select Use Ping, set the ping interval and the IP address to ping. D-Link DWR-922 User Manual...
  • Page 13 Section 3 - Configuration MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The default value is 1500. NAT: Check the box to enable Network Address Translation (NAT). D-Link DWR-922 User Manual...
  • Page 14: Ethernet Wan

    If your ISP provided DNS server addresses to use, select Manual DNS and enter the primary and (if applicable) secondary addresses. Otherwise, select Auto DNS to automatically assign a DNS server, or DNS Disabled to disable DNS. D-Link DWR-922 User Manual...
  • Page 15: Static Ip Address

    If your ISP provided DNS server addresses to use, select Manual DNS and enter the primary and (if applicable) secondary addresses. Otherwise, select Auto DNS to automatically assign a DNS server, or DNS Disabled to disable DNS. D-Link DWR-922 User Manual...
  • Page 16 Check the box to enable IGMP proxy. Enable PPPoE Check the box to enable PPPoE passthrough. Passthrough: Enable IPv6 Check the box to enable IPv6 passthrough. Passthrough: Connect Mode Select either Always On, Connect on Demand, or Manual. Select: D-Link DWR-922 User Manual...
  • Page 17 If your ISP provided DNS server addresses to use, select Manual DNS and enter the primary and (if applicable) secondary addresses. Otherwise, select Auto DNS to automatically assign a DNS server, or DNS Disabled to disable DNS. D-Link DWR-922 User Manual...
  • Page 18: Bridge Mode

    Section 3 - Configuration Bridge Mode If you selected Bridge Mode, there are no further settings to configure. D-Link DWR-922 User Manual...
  • Page 19: Pin Configuration

    To change your SIM’s PIN, enter the new PIN in the PIN text field. If you also wish to enable or disable PIN protection, check Enable PIN protection. This will mean that you have to input your PIN whenever a device using your SIM card is switched Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 20: Wi-Fi

    Create a name for your wireless network using up to 32 characters. Hide SSID: Check the box if you do not want to broadcast the SSID of your wireless network. Country: Select your country from the drop-down menu. D-Link DWR-922 User Manual...
  • Page 21: Wireless Security

    Select either 802.1x to use a RADIUS server for authentication, or PSK String to use a Pre-Shared Key (PSK). PSK String: If you are using a Pre-Shared Key (PSK), choose a key (between 8 and 63 characters) here. D-Link DWR-922 User Manual...
  • Page 22: Add Wireless Device With Wps

    Push Button. This has the same function as the physical WPS button in the front of the router. If you clicked Virtual Push Button, you will be prompted to push the button on the device you are connecting within 120 seconds. D-Link DWR-922 User Manual...
  • Page 23: Wlan Mac Filter

    Select whether to Allow or Deny the client. MAC Address: Enter the MAC address of the client. Existing Access Displays a list of the current rules. To remove a rule, select it and Rules: click Remove Selected. D-Link DWR-922 User Manual...
  • Page 24: Wlan Performance

    Channel Width: A higher channel width allows for faster data transmission, at the possible expense of wireless coverage and compatibility with older wireless clients. Select the optimum channel width for your wireless network from the drop-down menu. D-Link DWR-922 User Manual...
  • Page 25: Lan

    If a secondary IP address is enabled, enter the new IP address. Address: Secondary If a secondary IP address is enabled, enter the subnet mask. Subnet Mask: Local Domain Enter the local domain name for your network. Name: D-Link DWR-922 User Manual...
  • Page 26: Dhcp

    Enter the lease time for DHCP assignments. The default is 86400. Time: Check Enable to assign a new static IP address. Enter the MAC DHCP Static Address address of the client to assign, and the IP address that you want to Configuration: assign to it. D-Link DWR-922 User Manual...
  • Page 27: Advanced

    Select Use Auto/User Discovered DNS servers, Use only automatically detected DNS servers, or Use only manually specified DNS servers. Preferred DNS Enter the primary DNS server address. Server: Alternate DNS Enter an alternate DNS server address. Server: D-Link DWR-922 User Manual...
  • Page 28: Dynamic Dns

    Enter your username for the DDNS server. Password: Enter your password for the DDNS server. Confirm Re-enter your password for the DDNS server. Password: Hostname: Enter the hostname that you registered with your dynamic DNS service provider. D-Link DWR-922 User Manual...
  • Page 29: Applications

    Enter the port or range of ports to listen to in order to trigger the rule. Public Protocol: Select the protocol that will be used to access the application. Public Port: Enter the port or range of ports that will be used to access the application. D-Link DWR-922 User Manual...
  • Page 30: Dmz (Exposed Host)

    On this page you can enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. Enable DMZ: Check the box to enable DMZ. IP Address: Enter the IP address of the client you wish to expose. D-Link DWR-922 User Manual...
  • Page 31: Virtual Server

    Enter the starting public port you want to open. Port: External End Enter the ending public port you want to open. Port: Select the protocol type, TCP or UDP for the virtual server rule. Protocol Type: D-Link DWR-922 User Manual...
  • Page 32: Qos

    Check the box to enable Quality of Service (QoS). Packet Filter: Upstream Set this as closely as possible to your Internet upload bandwidth. If bandwidth: you are not sure, leave it at its default value, for best results. D-Link DWR-922 User Manual...
  • Page 33: Parental Control

    Check the box to enable the rule. Name: Enter the name of the rule. URL Keyword / Enter part of the URL or the domain you want to filter. Domain: Port: Enter the port number of the URL, if required. D-Link DWR-922 User Manual...
  • Page 34: Security

    Select either Firewall, DDoS & SPI, or MAC Filter to bring up the relevant settings for that security type Firewall The Firewall option allows you to configure the DWR-922’s firewall, and allow or deny access to your network over specific ports and addresses. Firewall...
  • Page 35: Ddos & Spi

    Select whether the rule is Enabled or Disabled, to temporarily turn it on or off without removing it entirely. Select the Protocol, and then enter the Source MAC and Destination MAC addresses. Click Apply to save the rule. D-Link DWR-922 User Manual...
  • Page 36: Igmp

    This page allows you to configure the router’s Internet Group Management Protocol (IGMP) settings. IGMP is a method to transmit data to multiple recipients. Enable IGMP Check the box to enable router to act as an IGMP proxy. Proxy: D-Link DWR-922 User Manual...
  • Page 37: Sms

    SMS Inbox: You will see a list of all received messages. Click on the message to view it, Delete to delete the selected message, Delete All to delete all messages, and Refresh to check for new messages. D-Link DWR-922 User Manual...
  • Page 38: Voice

    Enter the server port number, or leave it at its default. Protocol: Select the desired protocol to use for VoIP communications. Enable Check the box to use a network proxy for outbound VoIP Outbound Proxy: communications. Enter the details below. D-Link DWR-922 User Manual...
  • Page 39 Enter the port number for the outbound proxy server. Port: The remaining settings are for advanced users. Please check with your phone provider, or leave the settings at their defaults if you are not sure. Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 40 Password: Codec Priority & For each codec, you can specify the priority and packet interval Packet Interval: from the drop-down menus. Leave at the defaults if you are not sure. Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 41: Phones And Devices

    If you are not sure, leave the settings at their defaults, or contact your phone manufacturer. Incoming Check the Enable for Incoming box to enable the phone to Accounts: received calls from the specified accounts. Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 42 Enter a Name of your choice, and enter the Forwarding Number to forward incoming calls to. Finally, select the VoIP account that the rule should use, under the Connect via drop-down menu. Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 43: Incoming Call Rules

    Select a previously-configured VoIP account from the drop-down menu. Click Edit Rules to display a list of currently-configured rules. Analog Phones: Displays a list of analog phone devices and their statuses. External Call Click Add/Apply to add a new rule. Diversions (forwarding): D-Link DWR-922 User Manual...
  • Page 44: Country Code

    This page allows you to specify the default country code of outbound phone calls. Country Code: Select the country from the drop-down menu. The appropriate country code will be applied to each outgoing call. Click Apply when you are done. D-Link DWR-922 User Manual...
  • Page 45: Routing

    Enter the subnet mask to be used for the specified network. Subnet Mask: Interface: Select the interface to be used for the rule. Gateway IP Enter the gateway IP address for the specified network. Address: Metric: Enter the metric to be used for the rule. D-Link DWR-922 User Manual...
  • Page 46: Samba

    This page allows you to configure the router’s Samba file and printer sharing settings. Samba: Select Enable to enable Samba sharing, or Disable to disable it. NetBIOS Name: Enter a name to identify the device when sharing data. Workgroup: Enter the name of the workgroup to share data with. D-Link DWR-922 User Manual...
  • Page 47: Upnp

    This page allows you to configure the router’s Universal Plug and Play (UPnP) settings. UPnP provides compatibility with various networking equipment, software, and peripherals. UPnP: Check the box to enable the Universal Plug and Play (UPnP) feature. D-Link DWR-922 User Manual...
  • Page 48: Tr069

    Select the Month, Day, Year, Hour, Minute, and Second. STUN Enable: Select Enable to enable Session Traversal Utilities for NAT (STUN). STUN Server If you selected Enable above, enter the STUN server address. Address: STUN Server Enter the STUN server port. Port: D-Link DWR-922 User Manual...
  • Page 49 Section 3 - Configuration STUN Username: Enter the STUN username. STUN Password: Enter the STUN password. STUN UDP Listen Enter the STUN UDP listen port. Port: D-Link DWR-922 User Manual...
  • Page 50: System

    Enter the interval in seconds between time updates from the Interval: currently configured NTP server. Primary NTP Enter the address of the primary NTP server. Server: Secondary NTP Enter the address of the secondary (backup) NTP server. Server: D-Link DWR-922 User Manual...
  • Page 51: Administration

    To enable remote management, enter the IP address that the Management IP router will use for remote management. Address: For each protocol, check the Enable box under either LAN Access, Access WAN Access, or both, and specify a Port. Management: D-Link DWR-922 User Manual...
  • Page 52: System Settings

    Settings. Restore to To restore the router to its default settings, click Restore Device. Factory Default Note that any unsaved settings will be lost. Settings: Click Reboot to reboot the router. Save and Reboot the Device: D-Link DWR-922 User Manual...
  • Page 53: Firmware Update

    Displays your router’s current firmware version and build date. Information: Firmware To upgrade your router’s firmware, click Browse... and navigate Update: to the firmware file on your computer’s hard drive. Click Router Upgrade to start the upgrade process. D-Link DWR-922 User Manual...
  • Page 54: System Log

    Check the boxes for each information type you want to include in the system log. Log Enable: Check the box to enable remote logging. Remote Log If you checked the box to enable remote logging, enter the IP Server IP: address of the log server. D-Link DWR-922 User Manual...
  • Page 55: Device Info

    Section 3 - Configuration Device Info This page provides general information about your router and Internet connection. D-Link DWR-922 User Manual...
  • Page 56: Log Info

    Displays the current log server status, if enabled, and its current address. LOG FILES: The log is displayed below. Click Refresh to update it, Clear Log to clear it, and the navigation buttons below to select different pages in the log. D-Link DWR-922 User Manual...
  • Page 57: Statistics

    Section 3 - Configuration Statistics This page displays the router’s WAN and local network traffic statistics. Status: Select whether to view the WAN statistics or the LAN & Wireless statistics. The selected information will appear below. D-Link DWR-922 User Manual...
  • Page 58: Arp Table Info

    Section 3 - Configuration ARP Table Info This page displays the Address Resolution Protocol (ARP) information. Each IP address is shown with its corresponding MAC address and interface. D-Link DWR-922 User Manual...
  • Page 59: Routing Table Info

    Section 3 - Configuration Routing Table Info This page displays the current routing tables. D-Link DWR-922 User Manual...
  • Page 60: Connect A Wireless Client To Your Router

    Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DWR-922 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS.
  • Page 61: Windows® 8

    Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-922 User Manual...
  • Page 62 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DWR-922 User Manual...
  • Page 63: Windows® 7

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DWR-922 User Manual...
  • Page 64 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 81 for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-922 User Manual...
  • Page 65 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-922 User Manual...
  • Page 66: Wps

    Section 4 - Connecting to a Wireless Network The WPS feature of the DWR-922 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.
  • Page 67 Section 4 - Connecting to a Wireless Network 3. Double-click the DWR-922. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DWR-922 User Manual...
  • Page 68 Section 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DWR-922 User Manual...
  • Page 69 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DWR-922 User Manual...
  • Page 70: Windows Vista

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-922 User Manual...
  • Page 71: Wpa/Wpa2

    1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DWR-922 User Manual...
  • Page 72 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-922 User Manual...
  • Page 73: Windows® Xp

    Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-922 User Manual...
  • Page 74: Wpa/Wpa2

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DWR-922 User Manual...
  • Page 75 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DWR-922 User Manual...
  • Page 76: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 77 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
  • Page 78 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DWR-922 User Manual...
  • Page 79 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DWR-922 User Manual...
  • Page 80: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
  • Page 81: What Is Wireless

    D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B.
  • Page 82 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
  • Page 83: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus Adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries restaurants, and convention centers.
  • Page 84: Wireless Modes

    • Ad hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DWR-922 wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
  • Page 85: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
  • Page 86: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.1.1). The Alternate DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-922 User Manual...
  • Page 87: Wireless Security

    Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DWR-922 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •...
  • Page 88: Technical Specifications

    Maximum wireless signal rate derived from IEEE Standard 802.11g/b/n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DWR-922 User Manual...