Creating Pppoe Or Pppoa Wan Connection - D-Link User Manual

Wireless vdsl2 router with asdl2+ support
Table of Contents

Advertisement

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

Creating PPPoE or PPPoA WAN Connection

To create a connection of the PPPoE or PPPoA type,
Setup / WAN page in the Connections List section. On the opened page, go to the All
Settings tab. Then select the relevant value from the Connection Type drop-down list and
specify the needed values.
Figure 58. The page for creating a new PPPoE connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
For the PPPoE type only.
A physical interface to which the new connection will be assigned.
In order to create a VDSL WAN connection, select the PTM value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 73 of 168
Configuring via Web-based Interface
click the Add button on the Connections
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents