Table of Contents
Advertisement
Chapter 2 Preparations
4.
Install two front fan units (92 mm sq.) to the locations FAN1 and FAN3 (enclosed with dotted line in the
figure below). Use the four screws (two screws for one fan unit) provided with non-redundant fan unit to
secure the fan unit.
5.
Change jumper switch setting on motherboard to Non-redundant FAN.
112
Mounting
position "1.5"
FAN1
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
Mounting
position "3"
FAN3
Redundant FAN
Non-redundant FAN
Advertisement
Table of Contents
