Table of Contents
Advertisement
Chapter 2 Preparations
(3)
3.5-inch fixed type HDD cage
Remove 3.5-inch fixed type HDD cage in the following procedure.
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Disconnect SAS/SATA cable and power cable.
3.
Remove eight screws that secure 3.5-inch fixed tray.
4.
PUll out 3.5-inch fixed tray from the server.
5.
To use the server with 3.5-inch fixed type HDD cage removed, remove hard disk drives from the tray,
install the fixed tray, and secure the tray with screws.
6.
If you install another HDD cage, remove two tray rails.
102
Important
To maintain cooling effect in the server, be sure to attach blank covers.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
