Table of Contents
Advertisement
Chapter 2 Preparations
1.9.1 Installation
Follow steps below to install the processor. (A part of retention is omitted in the illustration below for easy
understanding.)
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Locate the CPU socket to which you are going to install a processor.
3.
Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops.
4.
Lift the plate.
5.
Remove the protective cover from the CPU socket.
60
Important
The CPU is extremely sensitive to static electricity. Make sure to touch the metal
frame of the server to discharge static electricity from your body before handling
the CPU. Do not touch the CPU pins by a bare hand or place the CPU directly on the
desk. For static notes, refer to Chapter 2 (1.2 Anti-static Measures).
Note
Keep the removed protective cover for future use.
Important
Do not touch the socket contacts.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
