Table of Contents
Advertisement
Chapter 2 Preparations
1.14.1 Installation
Install an optical disk drive in the following procedure.
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Pull out the 5.25-inch device bay cover from additional slot 1.
3.
Align the screw hole of optical disk drive with protrusion at left side of optical disk drive bay, and press the
upper right portion of optical disk drive to seat the drive.
4.
Connect a cable to optical disk drive.
5.
Attach a 5.25-inch device bay cover to additional slot 1.
104
Important
If an additional slot 1 contains any 5.25-inch device, remove the device
before installing an optical disk drive.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
