NEC N8100-2089F User Manual page 121

Chapter 2 Preparations
(2) When using SW RAID for 2.5-inch HDD cage (1 to 4 HDDs)
Change RAID configuration jumper to RAID Enable by referring the illustration below.
Use optional K410-258(00) internal SAS/SATA cable to connect 2.5-inch HDD cage with motherboard. Make
sure the position of key pin of SGPIO cable before connection.
Connector on motherboard
SATA0 (SATA cable 0)
SATA1 (SATA cable 1)
SATA2 (SATA cable 2)
SATA3 (SATA cable 3)
SATA3
SATA_SGPIO
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
SATA_SGPIO
SATA2
SATA1 SATA0
2.5-inch HDD cage
MINISAS_1 (MINI_SAS cable )
RAID Enable
121