Table of Contents
Advertisement
Chapter 2 Preparations
1.14.2 Removal
Remove optical disk drive in the following procedure.
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Pull out the 5.25-inch device bay cover from additional slot 1.
3.
Push the optical disk drive upward through the hole at bottom of optical disk drive bay.
4.
Move the optical disk drive toward right, disengage optical disk drive from protrusion at left side of drive
bay, and remove the optical disk drive.
Important
If an additional slot 1 contains any 5.25-inch device, remove the device
before removing an optical disk drive.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
105
Advertisement
Table of Contents
