NEC N8100-2089F User Manual page 93

Chapter 2 Preparations
5. Bring back the lever to its original position, and fix the SAS Expander Card.
Important
Do not touch the connector of PCI slot or the terminal part of SAS Expander
Card and the signal pins of electric parts installed on the board. Installing
boards with dirt or oil can cause malfunction.
 Make sure that the head of a SAS Expander Card bracket is seated into the
Note
fixed slot.
 If you have trouble installing the SAS Expander Card, remove the SAS
Expander Card once and try again. If you apply excessive pressure on the SAS
Expander Card, SAS Expander Card or PCI connector might break.
Tips
If the locking mechanism of PCI slot is tight, fix the SAS Expander Card slowly
until it is surely locked.
The installation state of the SAS Expander Card and the RAID controller
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
93