General Cleaning Tips - AXIOMTEK UST510-52B-FL Series User Manual

General Cleaning Tips

Please keep the following precautions in mind while understanding the details fully before
and during any cleaning of the computer and any components within.
A piece of dry cloth is ideal to clean the device.
1. Be cautious of any tiny removable components when using a vacuum cleaner to absorb
dirt on the floor.
2. Turn the system off before cleaning up the computer or any components within.
3. Avoid dropping any components inside the computer or getting circuit board damp or
wet.
4. For cleaning, be cautious of all kinds of cleaning solvents or chemicals which may cause
allergy to certain individuals.
5. Keep foods, drinks or cigarettes away from the computer.
Cleaning Tools:
Although many companies have created products to help improve the process of cleaning
computers and peripherals, users can also use house hold items accordingly for cleaning.
Listed below are items available for cleaning computers or computer peripherals.
Pay special attention to components requiring designated products for cleaning as mentioned
below.
⚫
Cloth: A piece of cloth is the best tool to use when rubbing up a component. Although
paper towels or tissues can be used on most hardware as well, it is recommended to
use a piece of cloth.
⚫ Water or rubbing alcohol: A piece of cloth may be somewhat moistened with water or
rubbing alcohol before being rubbed on the computer. Unknown solvents may be
harmful to plastic parts.
⚫ Vacuuming dust, dirt, hair, cigarette and other particles out of a computer can be one of
the best methods of cleaning a computer. Over time these items may restrict the airflow
in a computer and cause circuitry to corrode.
⚫ Cotton swabs: Cotton swabs moistened with rubbing alcohol or water are applicable to
reach areas in keyboard, mouse and other areas.
⚫ Foam swabs: If possible, it is better to use lint free swabs such as foam swabs.
【Note】:
It is strongly recommended that the user should shut down the system before
starting to clean any single component.
Please follow the steps below:
1. Close all application programs;
2. Close operating software;
3. Turn off power button;
4. Remove all devices;
5. Pull out the power cable.
v