Extron electronics PowerCage 401 User Manual page 36

Command
Set private password
Set private password to
default
View private password
Enable SNMP access
Disable SNMP access
View SNMP state
X1(
= SNMP private password, up to 64 characters (default = private)
KEY:
X2)
= 0 or 1
= Space
•
RS-232 port
Set serial port
parameters
View serial port
parameters
X1!
= RS-232 baud rate 300 to 115200 bps, default: 9600
KEY:
X1@
= RS-232 parity, default: none
X1#
= RS-232 data bits, default: 8
X1$
= RS-232 stop bits, default: 1
X2*
= UARTs 0 = frame,
SLOT 1 = UART 1 (left side #1) and UART 2 (right side #2)
SLOT 2 = UART 4 (left side #1) and UART 5 (right side #2)
SLOT 3 = UART 7 (left side #1) and UART 8 (right side #2)
SLOT 4 = UART 10 (left side #1) and UART 11 (right side #2)
Device name
Set device name
Reset device name
View device name
Set verbose mode
View verbose mode
X$
KEY: = Text string up to 63 characters drawn from the alphabet (A-Z), digits (0-9), minus sign/hyphen (-). No blank
or space characters are permitted as part of a name. No distinction is made between upper and lower
case. The first character must be an alpha character. The last character must not be a minus sign/hyphen.
X%
= Default name
X2&
= Verbose/response mode
ASCII Command Response
(host to PowerCage) (PowerCage to host)
E X1( }
X SNMP SnmpX*
E }
X SNMP SnmpX*private
•
E } X1(]
XSNMP
E }
E1SNMP SnmpE*1
E }
E0SNMP SnmpE*0
E } X2)]
ESNMP
E X2* X1!
* , Cpn
X1@ X1# X1$ }
, , CP
E X2* } X1!
CP
Cpn
Verbose mode 2/3
E X$ }
CN Ipn
E • }
CN Ipn
E } X% ]
CN
Ipn
Verbose mode 2/3
E X2& }
CV Vrb
E } X2&]
CV
Vrb
Verbose mode 2/3
Combination of model name and last 3 pairs of MAC address.
0 = clear/none, 1 = verbose mode, 2 = tagged response for queries
3 = verbose mode and tagged responses for queries
PowerCage 401 Enclosure • SIS Configuration and Control
X1(]
]
]
]
X2* • X1! X1@ X1# X1$]
Ccp , , ,
X1@ X1# X1$]
, , ,
X2* • X1! X1@ X1# X1$]
Ccp , , ,
• X$ ]
• X% ]
• X% ]
X2&]
X2&]
Additional Description
Default.
Enable or disable tagged
responses, which provide
additional information to a
query.
28