Table of Contents
Advertisement
Adjustments — With a desired submenu option displayed, rotate the horizontal ( [ )
•
and vertical ( { ) Adjust knobs clockwise or counterclockwise to display and select the
parameters available for the option.
NOTE: The Adjust knobs may also be used to adjust settings for the board devices
that are installed in the enclosure slots. As examples, the [ knob may select
the desired input or output, and the { knob may select values.
•
Implementation — To save and implement the adjustments you have selected, do one
of the following:
•
Press Next to display another submenu option to adjust.
•
Press Menu repeatedly until the Exit menu screen appears, then press Next.
•
Do nothing more, and wait until the LCD screen returns to the default cycle.
Your adjustments remain in effect until you change them or reset the unit to factory defaults
(see
Resetting the PowerCage 401 Enclosure with the Reset Button
NOTE: The menus time out and the default cycle displays after 30 seconds of inactivity.
However, any selections you made with the Adjust knobs are saved and remain in
effect.
Main Menu
The Main menu advances through
four menus by pressing the Menu
button, as shown below.
•
Slot menu
Frame Status menu
•
•
View Comm Settings menu
•
Exit menu
EXTRON
Power
POWERCAGE401
On
5 sec.
30 sec.
60-1492-01
FW v1.00.xxxx
SLOT MENU
FRAME STATUS
VIEW COMM
SETTINGS MENU
EXIT MENU
Menu
Figure 11.
Main Menu Flowchart
PowerCage 401 Enclosure • Operation
on page 14).
Default
Cycle
2 sec.
Menu
Menu
MENU
Menu
Menu
Next
17
Advertisement
Table of Contents
