Extron electronics PowerCage 401 User Manual page 49

Enclosure firmware update
NOTE: If necessary, download firmware updates from
Firmware Download
To update the firmware, click the Update button (see figure 30,
the Device Info panel. The Firmware Update dialog box opens (see figure 32).
Figure 32. Firmware Update Dialog Box
To update the firmware:
1. Click the Browse button. The File Upload dialog box opens.
2. Navigate to the location of the firmware file. Valid firmware files have an .eff extension.
Select the file and click the Open button. The File Upload dialog box closes.
3.
4. Click the Upload button. The Firmware Update dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
Card firmware update
NOTE: If necessary, download firmware updates from www.extron.com.
To update the card firmware, click the Update button (
Card Firmware Update dialog box opens (see figure 33).
To update the firmware:
1. Select the slot where the card is installed.
Click the Browse button. The File
2.
Upload dialog box opens.
3. Navigate to the location of the firmware
file. Valid firmware files have an .eff
extension.
4. Select the file and click the Open button.
The File Upload dialog box closes.
5. Click the Upload button. The Card
Firmware Update dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box
closes.
on page 48).
C
Figure 33.
PowerCage 401 Enclosure • Internal Web Page
www.extron.com (see
on the previous page) in
B
) in the Device Info panel. The
Card Firmware Update
Dialog Box
41 41