Table of Contents
Advertisement
Introduction
This guide describes the Extron PowerCage 401 enclosure and how to install, configure,
and operate the enclosure and its optional transmitter and receiver boards. Throughout this
guide "PowerCage" and "the enclosure" refer to the PowerCage 401 enclosure.
This section of the guide covers the following topics:
•
•
•
•
Guide Overview
This guide describes the PowerCage 401 enclosure and provides instructions for installing
all components of the system.
NOTE: Observe all applicable building codes and local ordinances when installing the
Product Description
The PowerCage 401 is a 1U high, rack-mountable, 4-slot enclosure with vents, fans, and
two integrated power supplies that supports a wide range of Extron fiber optic transmitter
and receiver boards. It provides an efficient way to power and mount multiple transmitters
and receivers. It features both RS-232, Ethernet, and USB control and a front panel LCD
screen.
A PowerCage 401 system can include any combination of PowerCage 401 fiber optic
(FOX) boards mounted within the PowerCage enclosure. Each optional board operates
independently of the others. This is an integrated system of individual transmitters and
receivers, not a matrixed system.
CAUTION: Risk of minor personal injury.
ATTENTION :
Guide Overview
Product Description
Features
Application Example
enclosure.
Risque de blessure mineure.
The PowerCage 401, PowerCage 411, and PowerCage 1600 system components
•
are not interchangeable.
•
Les composants de systèmes PowerCage 401, PowerCage 411, et PowerCage
1600 ne sont pas interchangeables.
•
PowerCage 401, PowerCage 411, and PowerCage 1600 boards and power
supplies are not compatible between the two different enclosures.
Les alimentations et les cartes PowerCage 411, PowerCage 401, et PowerCage
•
1600 ne sont pas compatibles entre les deux différents boîtiers.
PowerCage 401 Enclosure • Introduction
1
Advertisement
Table of Contents
