Different Size Originals - Canon iR 2020 Copying Manual

Different Size Originals

The Different Size Originals mode enables you to copy different size originals
together.
IMPORTANT
•
If your machine is the imageRUNNER 2016, the Feeder (DADF-P1) should be attached
to use this mode.
•
If paper of the same size as the original is not loaded in the paper drawer or stack
bypass, the machine automatically reduces, enlarges, or separates the copied image to
fit the paper loaded in the paper drawer or stack bypass.
•
The Different Size Originals mode cannot be used with the Two-Page Separation, 2 on 1
Combination, Original Frame Erase, Book Frame Erase, Binding Hole Erase, or Book to
2-Sided mode.
•
Make sure that the different size originals are of the same weight (paper type).
•
Set different size originals in the following combinations. Other combinations may
damage the originals.
×
- 11" 17" and LGL, LTR and LGL, LTR and LTRR
•
Align the top edge of the originals with the back edge of the feeder or the platen glass if
you are placing originals with different widths. ("Width" refers to the vertical measurement
of the paper from the front of the machine to the back of the machine when the paper is
placed in the feeder or the platen glass.)
•
If you place originals with different widths into the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
•
If the Different Size Originals mode is set in combination with the Auto Paper Selection
mode, Auto Orientation is not performed.

Different Size Originals

2
2-17