Canon iR 2020 Copying Manual page 17

7
If you want to stop or copy another original during a copy job,
follow the instructions below.
● If you want to stop a copy job:
Stop
❑
Press [Stop].
NOTE
•
For instructions on canceling a copy job, see "Canceling a Copy Job," on p. 1-18.
•
Several copies may be output even after you press
● If you want to start copying the next original while a previous
original is printing:
Start
❑
Place your originals ➞ press [Start].
NOTE
For instructions on reserving a copy job, see "Reserving Copy Jobs," on p. 1-21.
8
When copying is complete, remove your originals.
9
If the optional Card Reader-E1 is attached, remove the control
card.
NOTE
For instructions on using the optional Card Reader-E1, see Chapter 4, "Optional
Equipment," in the Reference Guide.
(Stop).
Flow of Copy Operations
1
1-7