Canon iR 2020 Copying Manual page 72

NOTE
•
If the Different Size Originals mode is used with the 1 to 2-Sided mode, the copies are
output as one-sided copies on paper of their respective sizes if the originals for the front
and back sides of a two-sided copy are different in size.
•
You can use the stack bypass for the Auto Paper Selection when:
- The paper is loaded in the stack bypass.
- The paper size is specified in <BYPASS STD SET> in the <COMMON SETTINGS>
- The Auto Paper Selection is set to 'ON' for the stack bypass in <COPY> of <AUTO
2
1
Different Size
2
Originals
3
OK
2-18 Different Size Originals
menu.
DRAWER SELCT> in the <COMMON SETTINGS> menu.
Place your originals in the feeder.
IMPORTANT
If your machine is the imageRUNNER 2016, place your originals in the feeder to
use the Different Size Originals mode.
Press [Different Size Originals].
Press [ ] or [
WIDTH' ➞ press [OK].
The Standby display appears, and an asterisk (*) appears on the LCD display
indicating that the Different Size Originals mode is set.
] to select 'SAME WIDTH' or 'DIFFERENT