Original Frame Erase - Canon iR 2020 Copying Manual

Original Frame Erase

The Original Frame Erase mode erases the dark borders and frame lines that
appear around the copy if the original is smaller than the selected paper size. You
can also use this mode to create a blank border around the edge of the copy.
Before using this mode, set the unit of measurement of the frame erase width in the
Additional Functions menu. (See "Frame Erase Width Unit of Measurement," on
p. 3-24.)
IMPORTANT
The Original Frame Erase mode cannot be used with the 2 on 1 Combination mode or
Different Size Originals mode.
1
Place your originals.
2
Frame Erase
Press [Frame Erase].
3
Press [
press [OK].
OK
4
Press [
press [OK].
OK
] until 'ORIGINAL FR' appears ➞
] or [
] to select the size of the original ➞
] or [
Frame Erase 2-7
2