Restoring The Default Copy Settings - Canon iR 2020 Copying Manual

2
Press [
press [OK].
OK
The <MM/INCH ENTRY> menu appears.
3
Press [
press [OK].
OK
If you want to set the standard frame erase width in inch, select 'INCHES'.
If you want to set the standard frame erase width in mm, select 'MM'.
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
Stop
4
Press [Stop] to return to the Standby display.

Restoring the Default Copy Settings

Modes that have been changed in Copy Settings (from the Additional Functions
menu) can be restored to their default settings. (See "Copy Settings Table," on
p. 3-2.)
NOTE
The default setting is 'NO'.
] until <MM/INCH ENTRY> appears ➞
] or [
] to select 'INCHES' or 'MM' ➞
] or [
Specifying Copy Settings
3
3-25