Binding Hole Erase - Canon iR 2020 Copying Manual

6
ABC DEF
Use
1 2 3
GHI JKL MNO
(1 to 99).
4 5 5 6
PQRS TUV WXYZ
7 8 9
SYMBOLS
Tone
0 #
NOTE
•
For more information about entering the copy quantity, see "Specifying the
Required Number of Copies," on p. 1-23.
•
The paper size is displayed according to the size of the original you have selected
in step 3.
Start
7
Press [Start].
Copying starts.
NOTE
•
To cancel all settings and return the machine to the Standby display, press
•
To cancel copy jobs, see "Canceling a Copy Job," on p. 1-18.

Binding Hole Erase

The Binding Hole Erase mode erases the shadows that appear on copies from
binding holes on originals.
Before using this mode, set the unit of measurement of the frame erase width in the
Additional Functions menu. (See "Frame Erase Width Unit of Measurement," on
p. 3-24.)
IMPORTANT
•
Do not place originals with binding holes into the feeder, otherwise the originals may be
damaged.
•
The Binding Hole Erase mode cannot be used with the Two-Page Separation mode or
Different Size Originals mode.
- (numeric keys) to enter the desired copy quantity
0 9
(Reset).
Frame Erase 2-11
2