NOTE
•
Image quality mode automatically changes to 'TEXT' when <AUTO DENSITY> is
set. You cannot select the original type.
•
An automatic density adjustment may not work with transparencies. In this case,
adjust the copy density manually by pressing [
Start
2
Press [Start].
Copying starts.
NOTE
•
If you place the original on the platen glass of the imageRUNNER 2016, or if the
machine cannot detect the size of the original, specify the size of the original after
pressing
Press [
•
To cancel all settings and return the machine to the Standby display, press
(Reset).
Manual Density Adjustment
You can manually adjust the copy density to the most appropriate level for the
original.
1
Place your originals.
2
Density
Press [Density] twice to select the manual mode.
(Start).
] to select the size ➞ press
] or [
] or [
].
(Start).
Density and Image Quality Adjustments
1
1-29