Two-Sided Copying; To 2-Sided - Canon iR 2020 Copying Manual

Two-Sided Copying

The Two-Sided mode enables you to make two-sided copies from one-sided or
two-sided originals, or make one-sided copies from two-sided originals.
IMPORTANT
2
You may not be able to make two-sided copies on some types of paper, depending on the
paper.
NOTE
•
If you are copying in the Two-Sided mode, align the top edge of the original with the back
edge of the platen glass (by the arrow in the top left corner), or with the back edge of the
feeder.
•
Paper used to make two-sided copies must conform to the following specifications:
- Paper size:
- Paper weight: 17 lb bond to 24 lb bond (64 g/m

1 to 2-Sided

This mode enables you to make two-sided copies from one-sided originals.
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and
STMTR, horizontally. If these originals are placed vertically, the back side of the original
is copied upside down.
2-20

Two-Sided Copying

11" × 17", LGL, LTR, LTRR, or STMTR
Originals
2 2
to 90 g/m )
Copy