Battery Replace; Conveyor Information - Okura Yusoki A Series Original Instructions Manual

6.9. Battery replace

The directory to battery
replacement
screen is as follows.
Maintenance menu
↓
Controller data
↓
Battery replace
Press respective
corresponding [Replace]
button when battery is
replaced for either [for robot],
[for controller] or [for touch
panel]. The current date is
stored. Or you can directly
change year, month and/or
day pressing those displayed.
Note
If wrong date is entered, waring message for replacing battery will be wrong
accordingly.

6.10. Conveyor information

The directory to conveyor
information is as
Follows.
Maintenance menu
↓
Controller data
↓
Conveyor information
Start, stop, and latch
clearance of
Built-in PLC can be carried out
- Press [Change] key to change
operation or stop in corresponding PLC.
Password is required (For system registration).
- Press [Latch clearance] key to clear latching in Built-in PLC (regular speed + high
speed).
Only under stop state, both regular and high speed PLC can be cleared.
6-12