System Storage - Okura Yusoki A Series Original Instructions Manual

5. System Storage

The various system parameters are explained in the section. In ordinary operation, there is
no need to change the system parameters. However, resetting them is necessary when
special setting was made, motor has been replaced or other maintenance has been
conducted.
The directory to the system storage menu screen is: Select [S: System storage mode] on
basic menu and enter the password to go.
Basic menu
System storage menu branches off to [Controller data], [Robot data] and [Motor axis data].
Robot
data
Ａ：Auto operation mode
Ｔ：Teaching mode
Ｓ：System storage mode
Ｍ：Maintenance mode
Controller
data
Motor axis
data
5-1