Id No - Prg No Allocation - Okura Yusoki A Series Original Instructions Manual

6.8. ID No – Prg No allocation
IDNo-PrgNo. allocation screen is displayed only at the time of the starting mode from
external PLC ( [X/Y] is selected at sys-para PLC control interface).
The directory to ID NO – Prg No allocation screen is as follows.
Maintenance menu
↓
Controller data
↓
IDNo－PrgNo allocation
- ID and program allocation
for
Centronix communication can
be shown and registered.
- To press [Cancel] allows to
cancel all the allocation of
IDNo.1 to 127.
-To press [Change] allows to
display IDNo. allocation
change screen.
ID No.assignment change
1. Enter ID No. with ten key.
Some number next to [Present Prg No.]
is shown up if it exists.
Cursor moves by itself to location of Prg No.
input
after entering ID No.
* A cursor can be also moved manually by
pressing [IDNo.] key or [PrgNo.] key.
2. Enter PrgNo. with ten-key.
Press [Cancel] key to cancel PrgNo. that is already assigned.
3. Press [Set] key after entering ID No. & Prg No.
6-11