JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 93

To create a report
1 On the Main screen, select Reports > Create Report ...
The Create Report dialog box appears.
2 Your unit will automatically assign a default file name to
your report as follows:
– The port number (if applicable) appears at the begin-
ning of the name. For example, if you are creating a
report while running a test on Port 1, "P1_" appears at
the beginning of the name.
– The interface appears next. For example, if you are
currently running a test on a 1 Gigabit Ethernet circuit,
"1GigE" appears after "P1_.
– The date and time, expressed per ISO 8601, appear
after the interface.
– Finally, a "report" suffix ends the filename.
– The appropriate extension for the file format that you
specify will be assigned when the report is created.
For example, if you select the Text format, a "txt"
extension will automatically be assigned to the file
name.
If you do not want to use the default filename, launch the
keypad for the File Name field, and then type a name.
3 In Format, select PDF, CSV, Text, HTML, or XML.
4 Select Choose Contents, and then expand each of the
following report information groups by selecting the plus
sign to the left.
– User Info
– Configuration Groups
– Results Groups
– Event Loggers
– Histograms
– Screenshots
T-BERD/MTS 5800 Getting Started Manual
Chapter 4 Basic Testing
Creating reports
71