Troubleshooting; Setup; Which Transceivers Are Compatible With The Instrument - JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual

Troubleshooting

Setup

Which transceivers
are compatible
with the
instrument?
2 Connect a USB flash drive to the USB connector on the
top panel.
3 Select the SYSTEM icon.
4 Select Upgrade.
5 Select USB.
6 Select Start Upgrade.
A dialog box appears directing you to exit any existing
tests.
7 Select OK.
NOTE:
The update will typically take 15 to 30 minutes.
The unit reboots when done.
If you experience problems using your instrument, you may be
able to solve these problems on your own after referring to this
section. If you experience significant problems with the instru-
ment, call the Technical Assistance Center (see
assistance" on page
The following issues may arise when setting up the instru-
ment.
A list of JDSU recommended optics is available by selecting
the corresponding option from the Help menu on the user
interface of your instrument. You can also see detailed infor-
mation for the currently inserted SFP or XFP on the Interface
setup tab of the user interface.
T-BERD/MTS 5800 Getting Started Manual
Chapter 6 Maintenance and Troubleshooting
xx).

Troubleshooting

"Technical
97