JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 64

Chapter 3 System Tools
Specifying network settings
42
4 If you specified Static IP mode, do the following.
a Select IP address, then enter the IP address.
b Select Net Mask, then enter the net mask address.
c Select Gateway, then enter the gateway address.
d Select DNS, then enter the address of the DNS server.
5 Select Enable wireless adapter.
In order to access wireless networks, you must have the
JDSU USB Wifi Dongle plugged into the instrument. The
order number for this is 21139796.
The T-BERD ⁄ MTS 5800 searches for nearby networks.
Table 2 explains each of the icons that may appear to the
right of the network name.
Table 2 WiFi icons
Icon Indicates
Secure network. Access requires entry of a WEP/
WPA key.
An encrypted network that the T-BERD ⁄ MTS 5800
doesn't support.
6 Select a network to connect to.
7 If you selected a secure network, the keyboard appears.
Enter the key code, and then click OK.
The network settings are specified.
T-BERD/MTS 5800 Getting Started Manual