JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 54

Chapter 2 Getting Started
Setting up the instrument
32
Figure 16 illustrates the LED panel for a SONET application in
ANT mode.
Figure 16 SONET LED Panel in ANT mode
To specify the LED results mode
1 Select the "Test" icon.
The Main screen appears.
2 Select Tools > Customize.
The Customize User Interface Look and Feel screen
appears.
3 Select the Result/Setup Terminology field, and then select
ANT or TestPad mode.
4 Select Close to store the result mode and return to the
Main screen.
T-BERD/MTS 5800 Getting Started Manual