JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 71

Figure 20 Setup page (Ethernet settings tab for L4 testing)
The setup page appears and typically includes a series of
tabs. The tabs vary based on the test application you
selected. See
3 To navigate to a different setup page, select the corre-
sponding tab at the top of the screen. For example, to
display the Traffic setup page, select the Traffic tab.
4 After you finish specifying the test settings (see
data in the setup fields" on page
button to return to the Main screen.
TIP:
If you want to provide a screen shot of a configuration tab
(for example, to capture the settings that you specified on
the tab), on the Main screen, select
Tools > Take Screenshot. A screen shot will be captured
and stored as a PNG file in the /Disk/images folder. You
can include the screen shot when you create reports.
T-BERD/MTS 5800 Getting Started Manual
.
Figure 20
Chapter 4 Basic Testing
Step 2: Configuring a test
"Entering
50), select the Results
49