JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 57

2 To specify tuning, do the following:
a Press the Results application button to return to the
b Use the Laser action buttons to specify the Tuning
Figure 18 Tuning the XFP
c If you selected Wavelength, click on the wavelength
NOTE:
You can also specify the tuning mode and wavelength/
channel in the Setup menu on the Signal tab.
T-BERD/MTS 5800 Getting Started Manual
Result screen
Mode: Wavelength or Channel.
field, and use the keypad to enter the wavelength.
If you selected Channel, click on the channel field, and
use the keypad to enter the channel.
Chapter 2 Getting Started
Preparing for optical testing
35