JDS Uniphase Portable Optical Tes Platforms MTS-6000 Specifications

MTS-6000 and MTS-8000 Optical Test Platforms
Connection Checker Promotion
Connection Check =
•Connector & patch panel inspection
•Continuity check
•Patch cord connectivity
•End to end loss
Highlights
• Built-in functions for permanent
availability
• Quick Jumper/Patchcord check with
VFL
• Power Level Measurement with
Optical Power Meter
• Communication and transfer along
the fiber with Talk set
Ordering information
E80VFL VFL with UPP connector
E80PM Optical power meter with
UPP connector (2.5 mm
provided as standard)
E8026LTSTS Optical loss test set with
talk set 1310/1550 nm
E8036LTSTS Optical loss test
set with talk set
1310/1550/1625 nm
Test & Measurement Regional Sales
NORTH AMERICA LATIN AMERICA
TOLL FREE: 1 866 228 3762 TEL:+55 11 5503 3800
FAX: +1 301 353 9216 FAX:+55 11 5505 1598
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Purchase a MTS-6000 Compact Optical Test Platform or a MTS-8000 Scalable Opti-
cal Test Platform and get 50% discount on these combinations below:
•Visual Fault Locator (VFL) & Power Meter
•Visual Fault Locator (VFL) & Optical Loss Test Set with Talk Set (LTS/TS)
- Dual wavelength
•Visual Fault Locator (VFL) & Optical Loss Test Set with Talk Set (LTS/TS)
– Triple wavelength
JDSU's MTS-8000 and MTS-6000's built-in "connection check" functions meet the
technicians demands in offering faster time to test, higher measurement reliability, quick
troubleshooting, as well as permanent availability.
VFL: Mandatory tool for any technician dealing with fiber patchcords and launch cables,
the built-in visible light source allows for quick fiber continuity checks and visual break
location, without the need of additional tools.
Optical Power Meter: Essential tool for quick power level measurement on live fiber,
the built-in power meter keeps the instrument on line, without the use of additional test
equipment.
Loss Test Set/Talk Set: The built-in talk set option allows communication between both
ends of the fiber while the test is running. The user can also send commands or transfer
results to the product at the other end for immediate comparison or remote control.
A data transfer function allows immediate far end results and performs bi-directional
OTDR analysis.
A power meter and a light source are necessary for attenuation (insertion loss) measure-
ment on fiber links. The built-in loss test set option allows for the measurement of end to
end loss without the need of other instruments.
ASIA PACIFIC
TEL:+852 2892 0990
FAX:+852 2892 0770
For a limited time, save
EMEA
WEBSITE
TEL:+49 7121 86 2222
FAX:+49 7121 86 1222
CONNECTION-CHECKER.1206.SS.FOP.TM.AE
50%
:www.jdsu.com