JDS Uniphase T-BERD ⁄ MTS 5800 Series Getting Started Manual page 61

3 To select multiple files, click on the Select dropdown box
and click Multiple.
4 To copy file or folder/directory, do the following:
a Click on the desired folder or file.
b Click Copy.
c Navigate to the desired location (where you want to
paste the file/folder).
d Click Paste, located above the file list.
This is only available if you have copied a file or folder.
5 To view files inside a folder, click a folder and then click
Open. A list of files appears.
6 To open a file, click on the file, and then click Open.
The contents of the file appear.
NOTE:
Some file types are not supported on the instrument. For
example, if you capture and save packets, the .pcap file
cannot be viewed on the T-BERD ⁄ MTS 5800 unless you
open Wireshark before viewing the file. Alternatively, the file
could be exported to a PC for viewing in Wireshark.
7 To move a file or folder, do the following:
a Click on the desired folder or file.
b Click Cut.
c Navigate to the desired location (where you want to
paste the file/folder).
d Click Paste, located above the file list.
This is only available if you have copied or cut a file or
folder.
8 To delete a file or entire folder, click on the desired file or
folder, and then click Delete. An acknowledgement
screen appears. Click OK to delete.
T-BERD/MTS 5800 Getting Started Manual
Chapter 3 System Tools
Managing files
39