Dismounting And Installing The Battery Charger - Varta element backup 6 Operating Manual

•
Pull the battery converter out with the handles using
•
Release the plug connections and note the positions.
•
To reinstall the battery converter, carry out the work steps in reverse order.
Note: Only converters of type F, material number 727687, may be used.
For the documentation of the maintenance, see chapter 18 on page 106.
13.10.4

Dismounting and installing the battery charger

Before unplugging the black/red battery power cable, note the corresponding battery
charger and the corresponding battery module.
After installation, the cables must be reinserted on exactly the same battery charger
and battery module.
Only transducers of type 01D, material number 801085, may be used.
Ensure that the battery modules are switched off and that no LED display is lit up.
95
both hands
!