Error Lists; Eliminating Faults - Varta element backup 6 Operating Manual

13.5.2

Error lists

To read out the error lists:
•
System
Select the
The error lists (4) for the storage system and the grid and plant protection are displayed.
13.5.3

Eliminating faults

•
Identify the faults using the fault descriptions.
•
Directions for eliminating faults are also provided by the battery charger, battery module and battery
converter overviews.
There, check the status and faults categories as well as WR control, EMS control and ENS control.
•
If necessary, check the grid and plant settings (see chapter 12.4.5 on page 80) and remove the faults.
•
Then restart the store. To this end, switch the store "OFF" at the on/off switch and then "ON" again.
If the faults cannot be eliminated, inform VARTA Service.
In the case of stores operated offline, click the
88
button in the header.
Description
No.
1 Battery charger overview
2 Batter converter overview
3 Battery module serial number overview
4 Error list / grid and plant error list
5 Battery modules - battery chargers overview
Report
button (3) and send the report to VARTA Service.