Quick Install - Network - Varta element backup 6 Operating Manual
Hide thumbs
Also See for element backup 6:
- Instruction manual (118 pages) ,
- Instruction manual (159 pages) ,
- Add-on instructions (132 pages)
Table of Contents
Advertisement
11.12.4
Quick Install - network
Description
No.
1
Activate DHCP
2
Back / Cancel / Next
As standard, the store assumes the settings of the customer network.
To this end, the choice box beside
Should the connection not take place automatically, take the parameters from the manual of the network
router. With commercially available DSL routers, the DNS and gateway address are usually identical. In
company networks, they can differ. Additionally, you require the release of ports 4500, 21 and 37 for the
connection to the portal (does not apply to all users).
If the IP address, the DNS address and the gateway are to be set up statically, knowledge of
the static address issue is required.
i
For this, it is e.g. necessary to read out the network configuration of the router.
The address range 172.30.xxx.xxx and 172.31.xxx.xxx must not be issued as a static or dynamic
IP for the store.
•
Next
Click on
(2).
69
Activate DHCP
(1) is ticked as a factory setting.
Checkbox active / inactive
Advertisement
Table of Contents
