Element 18 - Fit And Connect Battery Modules - Varta element backup 6 Operating Manual

11.11.11

Element 18 - Fit and connect battery modules

Figure 8: Battery chargers 1 and 2, battery modules 1, 2 and 3,
Figure 9: Battery chargers 1, 2 and 3 back
1 Cable of converter with inscription and 1 x colour:
2 Connect the cable of converter 1 x colour:
3 Battery charger 1 must NOT be bridged with battery charger 2 and/or battery charger 3!
4 Connect the bridge from battery charger 2 (BC 2) to battery charger 3 (BC 3)
Mounting battery chargers 2 and 3
•
Remove the cover at position BL 2 and BL 3.
•
Remove the bottom plates of battery charger shaft BL 2 and BL 3.
•
Mount battery chargers 2 and 3. The battery chargers lock into the
end position. It is not necessary to use a screwdriver.
Mounting battery module 1
•
Battery module 1 (BM 1) is positioned behind, on the back wall of the storage cabinet.
62
violet
orange
to the battery charger 2 (BC 2)