Battery Module Assembly; Opening The Storage Cabinet - Varta element backup 6 Operating Manual

11.11.1

Battery module assembly

This section is directed towards the electrical specialist.
Touching live parts!
Danger to life.
Touching sharp-edged parts!
Cut injuries.
11.11.2

Opening the storage cabinet

The VARTA element backup is shut down using the on/off switch (3). Here, it should be taken into account,
however, that the replacement power connection is also supplied with voltage from the mains when switched
off. Thus, consumers connected to the replacement power connection are also supplied when the store is
switched off. If the replacement power connection is to be disconnected, the store must be switched off using
the on/off switch (3) and the network connection of the store switched off. (Racking out the store connection).
These two steps must be performed for work on the replacement power connection as well as for work on the
storage system.
1. Actuate the on/off switch (3),
2. Rack out fuse F1 (compare connection diagram).
Ensure that the on/off switch on the front of the housing is at "OFF" and the supply line to the store is
switched off.
To open the door, remove the three screws (4) on the left side of the cabinet.
Aid: Torx 25 screwdriver
54
DANGER
Comply with a waiting time of at least 3 minutes.
Ensure that the battery modules are switched off and that no LED display is lit
up.
The energy store must not be transported if a battery module is already
integrated.
Keep unauthorised persons away.
WARNING
Wear your personal protective equipment
No. Description
1 Cover
2 Type plate
3 On/off switch
4 Screws for opening the door
5 Black start button
6 Ventilation grid