Technical Parameters Varta Element Backup - Varta element backup 6 Operating Manual

3.8

Technical parameters VARTA element backup

Expansion stages
Nominal capacity (kWh)
Integrated network operation
AC charging power (kW)
AC discharging power (kW)
Batter converter layout
Grid connection
Inrush current
Replacement power network operation
AC discharging power (kW)
Network
Max. current per phase
Short-term overload per phase
Safeguard
Safeguard grid-side
Safeguard consumer replacement power network 6 A (B-character)
Performance recording
Setup site
Own consumption optimisation
Performance recording
Transport and packaging
Dimensions in mm (W x H x D)
Weight (incl. battery module)
System transport
Packaging in mm (W x H x D)
Switchover time (interruption time)
The switchover time between the separation of the power supply and the replacement power mode is normally
under 90 seconds. This also applies to the switchover time to the integrated network mode.
20
6 12
6.5 13.0
2.2 4.0
1.8 3.7
without isolating transformer
400 V AC, 3-phase, 50 Hz
< max. operating current for input and output
1.8 3.7
230 V AC, 1-phase, 50 Hz
400 V AC, 3-phase, 50 Hz
5.8 A
max. 12 A
16 A (B-character) RCD type A 0.03/25 A (TT
network)
RCD type B 0.03/25 A
3-phase, by means of current sensor
within the house
3-phase, regulated
3-phase, by means of current sensor
600 x 1176 x 500
115 kg 165 kg
vertical on a pallet
700 x 1,325 x 600
18
19.5
4.0
4.0
4.0
215 kg