Element 12 - Fit And Connect Battery Modules - Varta element backup 6 Operating Manual

11.11.10

Element 12 - Fit and connect battery modules

1 Cable of converter with inscription and 1 x colour:
2 Connect the cable of converter 1 x colour:
3 Battery charger 1 must NOT be bridged with battery charger 2 and/or battery charger 3!
Mounting battery charger 2
•
Remove the cover at position BL 2.
•
Remove the bottom plate in battery charger shaft BL 2.
•
Mount battery charger 2. The battery charger locks into the end
position. It is not necessary to use a screwdriver.
Mounting battery module 1
•
Battery module 1 (BM 1) is positioned behind, on the back wall of the storage cabinet.
Mounting battery module 2
•
Battery module 2 (BM 2) is positioned in front of battery module 1 (BM 1).
First create the connection between battery charger 1 (BL 1) and battery module 1 (BM 1).
60
Figure 6: Battery chargers 1 and 2, battery modules 1 and 2
Figure 7: Battery charger 1 and 2 back
violet
orange
to the battery charger 2 (BC 2)