Table of Contents
Advertisement
Basic
Safety Instructions
1.1.1
Languages
1.1.2
Changes to the document
1.2
Handling the Product
1.3
Use in Accordance with the Intended Purpose
1.3.1
Exclusive Purpose
1.3.2
Improper Use
2/66
POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
The original user manual is written in German. All other available languages are translations
of the original user manual.
The user manual is available in German and English. If you require any other languages,
please ask BARTEC or request them when placing the order.
BARTEC reserves the right to alter the contents of this document without notice. No
guarantee is given for the correctness of the information. In case of doubt, the German
safety instructions shall apply because it is not possible to rule out errors in translation or in
printing. In the event of a legal dispute, the "General Terms and Conditions" of the BARTEC
group shall apply in addition.
The respective up-to-date versions of data sheets, manuals, certificates, EC Declaration of
Conformity may be downloaded at
in the area "Automatic Technology" or ordered directly from BARTEC GmbH.
The product described in these operating instructions has been tested and left the factory
in perfect condition as regards meeting safety requirements. To maintain this condition and
ensure that this product operates perfectly and safely, it may be used only in the manner
described by the manufacturer. Appropriate transportation, suitable storage and careful
operation are also essential for the perfect and safe operation of this product. The POLARIS
must be installed properly and securely if it is to work perfectly and correctly.
The safe and perfect mounting of the POLARIS is a precondition for faultless and correct
operation.
It is used exclusively in combination with operating devices which satisfy the requirements
for Overvoltage Category I.
The POLARIS PROFESSIONAL Panel PCs have been designed specially for use in
hazardous (potentially explosive) areas in Zone 2 and Zones 22.
It is essential to observe the permissible operational data for the device being used.
Any other use is not in accordance with the intended purpose and can cause damage and
accidents. The manufacturer will not be liable for any use beyond that of its exclusive
intended purpose.
- for Zone 2 / 22
www.bartec-group.com
under products and solutions
Technical data subject to change without notice..
08/2019
Advertisement
Table of Contents
