Terminal Compartment X1; Cable Entries; Connection Of A Keyboard To The Polaris (Optional) - Bartec POLARIS PROFESSIONAL B7-72V1 Series User Manual

POLARIS PROFESSIONAL
POLARIS Panel PC Professional 15" up to 24"
5.7

Terminal compartment X1

5.7.1

Cable entries

5.7.2

Connection of a keyboard to the POLARIS (optional)

Technical data subject to change without notice.
08/2019
- for Zone 2 / 22
When connecting cables and leads to supplies / communications equipment in the Ex area,
Ex certified cable entries must be used which are suitable for the respective type of cable
and lead. You must include a suitable sealing element so that an IP rating of at least IP 54
is maintained.
DANGER
Do not connect cables and leads while the power supply is active.
Danger to life exists in an explosive atmosphere!
Disconnect the device before beginning any work.

DANGER
Accessories which have not been approved jeopardise the explosion protection.
Danger to life exists in an explosive atmosphere!
Only use POLARIS accessories!

PS/2 for input devices
Terminal Interface
X4 PS/2
X5 PS/2
X6 PS/2
X7 PS/2
X8 PS/2
X9 PS/2
- Make the connection between the POLARIS Panel PC and the keyboard.
- Connection by means of a 1.80-metre-long connection cable
- Keyboard and mouse
- Keyboard and trackball/joystick
- Keyboard and touchpad
(Optional: 3-metre-long connection cable)
Colour Signal Remarks
WH/BN VCC Supply voltage
GN/YE GND Mass connected to protective earth
PK KB_CLK Keyboard
GR KB_DATA Keyboard
BU MS_CLK Mouse
RD MS_DATA Mouse
Type 05-0068-0163
Type 05-0068-0172
Type 05-0068-0183
Installation
clock signal
data signal
clock signal
data signal
39/66